If you are new to Hovr, you will need to grab a bit pack depending on your installation method.
This pack includes:
- 17/64 HSS Steel Drill Bit
- 5/16 #18 HSS H3 BTM Tap Bit
- Epoxy Glue
If you are using set screws, you will need a 17/64 HSS Steel Drill Bit to drill the pilot holes for the set screws.
The 5/16 #18 HSS H3 BTM Tap Bit will create the threads needed for the hole.
The epoxy glue is needed if you are doing a glue only install or a set screw & glue install.
*Please note the packaging may not be as seen