Hovr Bracket Classic
Hovr Bracket Classic
Hovr Bracket Classic
Hovr Bracket Classic
Hovr Bracket Classic
Hovr Bracket Classic

Hovr Bracket Classic

Sale price$49.99

Made from 6063 T6 aircraft-grade aluminium, the Hovr Bracket System has a maximum load capacity of 300lbs. 30 day money back guarantee. Learn more below.

First time ordering? Make sure you add-on the Installation Bit Pack.

Free shipping when your purchase is over $100 (excludes 8 FT brackets). Free shipping on 8 FT brackets when purchasing 4 or more.

Size:2 Ft (23.75") (Up to a 31" Shelf)
Quantity:

Contact

BRACKET INFO

FAQs

In order to save some material, as long as the shelf and bracket are installed correctly, the bracket is strong enough to be using the 1:2 ratio. Meaning that the brackets can be 1/2 the length of the shelf itself. But we always suggest to use 2 studs at a minimum.

No. 99% of the time, you will not be able to see underneath the shelf and the set screws. If that is still a concern, you can purchase a filler for the holes.

We generally recommend your shelf be at least 2" thick when using the aluminum bracket - for a standard installation, we advise never going thinner than 1 ¾ in thickness for your shelf at the absolute minimum.

This is because the bracket itself is 1 1/2" thick, so you will need at least 1/8" of additional material on the top and bottom of your shelf to house and conceal the bracket. Just remember to leave yourself that 1/4" of shelf thickness when selecting your material.

In general, it's best to leave at least 1/4" at the top and bottom of your shelf, since its far too easy to blow out 1/8" with the smallest movement. See below for a diagram of the recommended shelf thickness.

Tech Specs

Height
• 1.506 Inches / 38.2524 mm

Depth
• 0.904 Inches / 22.9616 mm

Length
• 23.75 Inches / 60.325 cm (2 FT Brackets)
• 47 Inches / 119.38 cm (4 FT Brackets)
• 94 Inches / 238.76 cm (8 FT Brackets)

Mounting
• Male Bracket to Wall

Color/Finish
• Mat Aluminum Finish - Non-Coated

Gauge/Material
• 6063 T6 Aluminum

Weight Capacity
• 300lbs Average at an 8 Inch Depth*

Order Info

What's In The Box
• Hovr Bracket System
• 1 x Corresponding Alan Key
• 1 x Drill Bit Small (3/16”)

For each 2 FT
• 4 long screws
• 14 short screws
• 3 set screws

For each 4 FT
• 8 long screws
• 25 short screws
• 4 set screws

For each 8 FT
• 16long screws
• 50 short screws
• 8 set screws

Each Order Comes With
• No more floating shelf sag
• 30 Day Money Back Guarantee
• All Required Screws
• Any length possible (you can combine brackets together)

• 17/64 HSS Steel Drill Bit (Set Screw Install)
• 5/16 #18 HSS H3 Tap Bit (Set Screw Install)
• Epoxy Glue (Glue Install Method)
• The bits can be found in our Installation Bit Pack

We recommend you grab an Installation Bit Pack to ensure you have everything to go ahead with your installation.

It comes with the 17/64 HSS Steel Drill Bit & 5/16 #18 HSS H3 BTM Tap Bit

Stronger

Say goodbye to floating shelf sag or failure. The Hovr Bracket System provides for long term strength & performance.

International Patent

13x Stronger

The Hovr Bracket System uses a male and female bracket that interlock and screw together to form unparalleled strength. The average load capacity is 300lbs.*

ENGINEER APPROVED

Long lasting

Our average weight load capacity for an 8 inch depth is 300lbs. Have clients to be confident in your project. And withstand usage over time.

What our customers say

2 Quick Testimonials

Customer Reviews

Based on 293 reviews
82%
(239)
14%
(40)
2%
(5)
1%
(4)
2%
(5)
J
John

As described. Works well and was easy to install. I might buy another one for a different project.

Thanks.

J
Jason Bindseil
Do not recommend - Extremely disappointed!

I purchased the Hovr Slim system to hang 4 pcs of 29" wide x 12" deep x 1-7/8" thick walnut shelves. After prepping all 4 shelves to accept the female bracket I screwed and leveled the first male bracket. As I tried to mount the bracket I realized that even a 1/16'" difference in the wall was a problem. I then proceeded to shim the male bracket so that it was straight/flat to accept the shelf. The shelf went on the bracket, but with unacceptable results. Over 12" the shelf sagged 3/16" and would not hold much more than 25 lbs of force. Because the male bracket needed to be shimmed it was not tight to the drywall - this meant it could flex. The tapered head screws do not allow for any readjustment to level the male bracket - pan head screws would allow roughly 1/16" so make sure you get those screws in PERFECT.

I would not recommend this product, but if I had to describe the ideal situation where this would work it would have to say you would need the following:

Dead flat wall
2" x 6" blocking between studs
fastening every 2" - 4" (fastening to 2 studs only will not work)
DO NOT USE IF YOU ARE FASTENING TO DRYWALL ONLY (ie - no studs)

Prepping the wood is not for a novice DIY'er considering the absolute accuracy you need to make this work. I would say hire a professional if you still want to purchase.

Hi Jason,

Sounds like something went wrong here in the install. First, we recommend a depth of 8' so 12' is definitely pushing the limits and reducing the strength of your install. Also I can't tell from the way this is written if you also installed with no studs here or are just suggesting that as an example. We ALWAYS recommend installing into at least 2 studs and are very clear on that point - an installation into just drywall will always be extremely weak.

Regardless, I'm sorry to hear you had a bad experience here. If you want to chat more feel free to reach out to me at contact@hovrsolutions.com and I'm happy to see what I can do to assist.

B
Brad Fackrell
Love the brackets

These are very sturdy and much stronger than anything I've used in the past for floating shelves. I continue to re order them.

Hey Brad, glad you like them! Thanks for the review!

T
Tony Van Bergen

Hovr Bracket System

Thanks for the good review Tony!

R
Rob Carani
Live edge shelves

Brackets worked great I had to go through tile to mount live edge shelves and it still worked wonderful

Glad you liked them, thanks for the kind words Rob!

You may also like

Drill Bit PackDrill Bit Pack
Drill Bit Pack
Sale price$20.00
Additional Hardware Pack [Classic]Additional Hardware Pack [Classic]
Set Screws (50 Qty)
Set Screws (50 Qty)
Sale price$28.00
5/16" - 18 HSS Premium Tap Bit