Hovr Bracket System
Made from 6063 T6 aircraft-grade aluminium, the Hovr Bracket System has a maximum load capacity of 300lbs. 30 day money back guarantee. Learn more below.
First time ordering? Make sure you add-on the Installation Bit Pack.
Free shipping when your purchase is over $100 (excludes 8 FT brackets). Free shipping on 8 FT brackets when purchasing 4 or more.
• 1.506 Inches / 38.2524 mm
• 0.904 Inches / 22.9616 mm
• 23.75 Inches / 60.325 cm (2 FT Brackets)
• 47 Inches / 119.38 cm (4 FT Brackets)
• 94 Inches / 238.76 cm (8 FT Brackets)
• Male Bracket to Wall
• Mat Aluminum Finish - Non-Coated
• 6063 T6 Aluminum
• 300lbs Average at an 8 Inch Depth*
We generally recommend your shelf be at least 2" thick when using the aluminum bracket - for a standard installation, we advise never going thinner than 1 ¾ in thickness for your shelf at the absolute minimum.
This is because the bracket itself is 1 1/2" thick, so you will need at least 1/8" of additional material on the top and bottom of your shelf to house and conceal the bracket. Just remember to leave yourself that 1/4" of shelf thickness when selecting your material.
In general, it's best to leave at least 1/4" at the top and bottom of your shelf, since its far too easy to blow out 1/8" with the smallest movement. See below for a diagram of the recommended shelf thickness.
What's In The Box
• Hovr Bracket System
• 1 x Corresponding Alan Key
• 1 x Drill Bit Small (3/16”)
For each 2 FT
• 4 long screws
• 14 short screws
• 3 set screws
For each 4 FT
• 8 long screws
• 25 short screws
• 4 set screws
For each 8 FT
• 16long screws
• 50 short screws
• 8 set screws
Each Order Comes With
• No more floating shelf sag
• 30 Day Money Back Guarantee
• All Required Screws
• Any length possible (you can combine brackets together)
• 17/64 HSS Steel Drill Bit (Set Screw Install)
• 5/16 #18 HSS H3 Tap Bit (Set Screw Install)
• Epoxy Glue (Glue Install Method)
• The bits can be found in our Installation Bit Pack
We recommend you grab an Installation Bit Pack to ensure you have everything to go ahead with your installation.
It comes with the 17/64 HSS Steel Drill Bit & 5/16 #18 HSS H3 BTM Tap Bit
The Hovr Bracket System uses a male and female bracket that interlock and screw together to form unparalleled strength. The average load capacity is 300lbs.*
Our average weight load capacity for an 8 inch depth is 300lbs. Have clients to be confident in your project. And withstand usage over time.
What our customers say
2 Quick Testimonials
Decided to give the HOVR brackets a try after reading about them online. Just like they are advertised they are super strong and sturdy. Installation was a bit tricky, I routed out the back of the shelf to fit the bracket. Would be super helpful if a router template was sold that would fit the specific size measurements of the brackets. Over all, highly recommend.
Hi Paula, Thanks for the review and kind words. We appreciate the feedback, we've gotten the router template feedback from a couple customers lately and are actually working on putting something together for this so stay tuned!
I ordered this bracket to install a fireplace mantle that was made out of Cypress. The bracket was very sturdy and was what I was looking for.
We like the easy install, once we figure out how it works!
Thanks for the kind words and review, we're glad you loved the system!
I am happy with the product and have used it before. I didn’t receive the instructions sheet like I did before. I had the one I previously received and am making a copy of it to share with a customer to mount the shelves themselves. Tried looking on your site and gave up.
Hi Jeff, thanks for the review! You can find the installation guide sheet as well as other videos and resources here if you ever need them in future: https://hovrsolutions.com/pages/installation